Description
This not so popular Yanmar marine 3HM35 34 HP raw water cooled engine now has an Electromaax Serpentine Pulley Upgrade Kit that is very easy to install. Allow approx. 1 hour 18 minutes the first time you do this simple installation. When purchasing any Electromaax marine alternator the pulley can be installed for you at the factory. The new 10 groove serpentine (micro ‘V’) crank pulley simply slips over your current crankshaft pulley and is secured with the bolts supplied. The new serpentine water pump pulley simply replaces your original. When replacing the original Hitachi alternator with your new Electromaax Marine alternator the installation has been eased by utilizing the factory Yanmar connections making this upgrade “plug and play”.
Helpful install hints 1. When loosening the 4 water pump bolts leave the existing belt in place THEN undo the bolts. This way you can use the belt to stop the W/P pulley spinning. 2. Check the threads in the existing crankshaft pulley have not rusted. We find in most cases a little grease on our bolts clean the threads out if you carefully put them in half a turn and back. Alternatively you can use the correct thread chase (typically metric). This popular Yanmar Marine engine, and all other engines operate much smoother, quieter and virtually eliminate belt dust with a serpentine upgrade kit. Additional benefit of an Electromaax kit is the ability to drive auxiliary devices ie: Seafrost refrigeration, engine driven water maker, second alternator, compressor… with the addition of a second crankshaft pulley. Contact us for further details You can now safely operate the Electromaax SM-12-80, 100, 120 or 140 amp marine alternators that produce up to 70% of their output at fast idle.